Precautions for the operation of peanut peeling machine

Peanut peeling machine is mainly used for peeling peanuts before frying. This equipment is suitable for processing peeled peanuts of various specifications. But in use, pay attention to the following operations:

1. Before using the peanut peeling machine, first check whether the fasteners are tightened, whether the rotating part is flexible, whether there is lubricating oil in each bearing, and whether the peeling machine is placed smoothly. In order to ensure the safety of operators, grounding protection is also required for the motor casing.
2. Use manpower to turn the peanut peeling machine a few times before electrifying. If there is a crash sound, the cause should be found out and then electrified.
3. Appropriate screen should be selected according to the size of peanut kernels.
4. After the power is turned on, it should be tested first and pay attention to whether the rotation of the rotor is correct. After the motor is started, the direction of rotation of the rotor should be consistent with the direction marked on the implement. Idle for a few minutes first, and observe whether there is any abnormal sound. If there is no abnormal sound, the peanuts can be put into the feeding hopper after the operation is normal and stable. Pay attention to the quantitative, uniform and continuous input.
5. When peeling, the peanuts should be fed evenly and in an appropriate amount. Iron filings, stones and other debris are not allowed to be mixed in to prevent breaking peanut kernels or causing mechanical accidents. When the peanut kernels cover the sieve surface, the outlet switch can be turned on.